Do you have a pressure washer? An extension wand for a pressure washer can be extremely helpful in certain situations. An extension wand is simply an attachment that you can add to your pressure washer hose. This will give you an extra few feet of reach, which can be very helpful.
With the right extension wand, you will be able to reach high places and tight spaces with ease. This will make your job much easier and faster, without having to worry about straining yourself or damaging your equipment.
If you have a pressure washer, then you know that they can be very useful for cleaning. However, sometimes it can be difficult to reach certain areas with the pressure washer nozzle. This is where an extension wand for pressure washer comes in handy.
7 Steps To Use an Extension Wand for a Pressure Washer
We’ve listed a few easy and detailed steps on how you can use an extension wand for your pressure washer.
#1 – Check the GFCI
The first thing you need to do is to check the ground fault circuit interrupter or (GFCI). You can find this easily as it is usually plugged into an outdoor outlet. Once you have found it, make sure to test the GFCI by pressing the “test” button and then the “reset” button.
#2 – Assemble Your Pressure Washer
Now that you have checked the GFCI, it is time to assemble your pressure washer. If you have a gas pressure washer, start by adding oil to the engine. If you have an electric pressure washer, simply connect it to the power source.
After you have done either of these steps, it is time to add water to the pressure washer. Make sure that the water source is turned off before you start connecting the pressure washer hose. Once the hose is connected, you can turn on the water source.
If you are using a chemical injector, now is the time to add your detergent to the pressure washer.
#3 – Connect Your Extension Wand
Once you have your pressure washer assembled and ready to go, it is time to connect your extension wand. Start by screwing the quick-connect fitting onto the end of your wand. Once it is tight, push the other end of the wand onto the quick-connect fitting on your pressure washer hose.
#4 – Turn on Your Pressure Washer
Now that your extension wand is connected, you can turn on your pressure washer. Start by pulling the trigger on the wand to release any water that may be in the wand. Once you have done this, you can turn on your pressure washer.
#5 – Adjust the Pressure
Once your pressure washer is turned on, you will need to adjust the pressure. The pressure can be adjusted by turning the knob on the pressure washer. Depending on what you are cleaning, you will need to adjust the pressure accordingly. If you are unsure of what pressure to use, start with a lower setting and work your way up.
#6 – Hold the Wand Properly
Now that you have your pressure washer running at the desired pressure, it is time to start cleaning. When holding the wand, make sure that your fingers are not touching the trigger. You should also hold the wand at a 45-degree angle.
#7 – Move the Wand in a Circular Motion
When cleaning with your pressure washer, you will want to move the wand in a circular motion. This will help to loosen any dirt or grime that may be on the surface you are cleaning.
Now that you know how to use an extension wand for your pressure washer, you can easily reach those difficult-to-reach areas. Be sure to follow the steps we have listed above and you will have no problem using your extension wand.
As you can see, using an extension wand for your pressure washer is not difficult. Just follow the steps we have listed above and you will be cleaning like a pro in no time!